universal ac input / full range no load power consumption <0.3w erp step2 compliant meet eisa 2007 (energy independence and security act) 2 pole euro plug class power (without earth pin) protections: short circuit / overload / over voltage pass lps fully enclosed plastic case approvals: tuv / cb / fcc / ce 2 years warranty specification order no. safety model no. dc voltage note.2 rated current current range rated power ripple & noise (max.) note.3 output setup, rise, hold up time voltage range frequency range efficiency (typ.) note.7 ac current input environment inrush current (max.) leakage current(max.) safety standards safety & emc (note. 8) working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing protection 5v 7.5v 9v 12v 15v 18v 24v 48v gpsu06e-1 gpsu06e-1-1 gpsu06e-2 gpsu06e-3 gpsu06e-4 gpsu06e-5 gpsu06e-6 gpsu06 e-8 1.00a 0.8a 0.66a 0.5a 0.4a 0.33a 0.25a 0.125a 0 ~ 1.00a 0 ~ 0.8a 0 ~ 0.66a 0 ~ 0.5a 0 ~ 0.4a 0 ~ 0.33a 0 ~ 0.25a 0 ~ 0.125a 5w 6w 6w 6w 6w 6w 6w 6w 50mvp-p 80mvp-p 80mvp-p 100mvp-p 120mvp-p 150mvp-p 180mvp -p 200mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 2.0% 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 2.0% 1000ms, 50ms, 12ms at full load 90 ~ 264vac 127 ~ 370vdc 47 ~ 63hz 68% 74% 75% 77% 78% 78% 82% 84% 0.2a / 100vac 50a / 230vac 0.25ma / 240vac en60950-1 approved withstand voltage isolation resistance i/p-o/p:4242vdc i/p-o/p:100m ohms / 500vdc / 25 / 70% rh 500khrs min. mil-hdbk-217f(25 ) 0 ~ +40 (refer to "derating curve") 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 32*66*42.5mm (l*w*h) 100g ; 90pcs / 10kg / carton connector plug cable standard type for stock ther type available by customer requested p1j: 2.1 * 5.5 * 11mm, turning fork type center positive ; o standard type 20 for stock ther type available by customer requested awg ul1185 6ft ; o voltage adj. range fixed 5 ~ 6v 6 ~ 8v 8 ~ 11v 11 ~ 13v 13 ~ 16v 16 ~ 21v 21 ~ 27v 33 ~ 48v 1.all parameters are specified at 230vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerance: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 0% to 100% rated load 7.efficiency is measured at 230vac. 8.the power supply is considered as an independent unit, but the final equi pment still need to re-confirm that the whole system complies with the emc directives. features : compliance to en55022, fcc part15 class b en61000-3-2,3, compliance to en61000-4-2,3,4,5,6,11, l criteria a ight industry level, overload over voltage protection type : hiccup mode, recovers automatically after fault con dition is removed >120% rated output power >105% rated output voltage power for 5v ; >110% rated output power for 7.5 ~ 48v protection type : clamp by zener diode tuv rheinland product safety geprufresicherheit 5 ~ 6w ac-dc single output wall-mounted type g s 0 6 e s e r i e s gs06e-1p1j GS06E-11P1J gs06e-2p1j gs06e-3p1j gs06e-4p1j gs06e-5p1j gs06e-6p1j gs06e-8p1j emc immunity emc emission file name:gs06e-spec 2011-06-14
mechanical specification derating curve file name:gs06e-spec 2011-06-14 unit:mm ta ( ) load (%) 0 10 20 30 50 40 70 100 static characteristics input voltage load (%) 0 50 60 70 60 100 260 80 90 100 80 5 ~ 6w ac-dc single output wall-mounted type g s 0 6 e s e r i e s plug assignment standard plug: p1j id 2.1 x od 5.5 11 19 0.5 66 1 32 1 42.5 1 62.5 1 13.6 4 18.3 18 19.8 34.5 1 name plate c"+" ul1185 20awg 1830 50mm p/n output p1j center +
|